Miro automatically changes zoom size when linking to another board

@Kiron Bondale - Thanks for the link to that post! After reading it, and playing around a bit, I also have a better understanding of the zoom level works.

@Bennie Naude - If you were to enlarge the objects you are linking too, Miro would stay at a 100% zoom. In this example, I kept change the size of the frame I was linking to until it would trigger Miro to display it at 100% when I linked to it, e.g.:

And, if you were not at 100% zoom already, Miro would zoom to 100%:

However, even if you were to go through the process of resizing all of your linked-to objects so that Miro would change the board display to 100%, as the post Kiron shared, this is all still based on “fit to screen”, so as soon as I even change the size of my browser window, it will no longer display at 100%:

@Kiron Bondale and @Robert Johnson many thanks for your quick and comprehensive responses - understood.

Best.

Had this problem too. Clicking a link to an object in a different part of the board resulted in zoom levels I didn’t want. Then I was spending time re zooming. Inelegant.

My Fix?

Use Kirons answer above, and set up a frame for each area I was linking to, knowing that the link to operation to that frame will fill the screen. I used the same frame size for each ‘page’ on the board. Then the link is set to the frame itself, not to any of the items inside the frame. Voila - it gives the appearance of very smooth movement back and forth.

I also add links to the prior frame and to the next frame at the top for easy navigation in the board.

This worked for me