Skip to main content
Question

Urgent help needed - Linking for a template


mlanders
Forum|alt.badge.img+9
  • Experienced Community Member
  • 743 replies

Hi,

I created a board - have linked different sections and parts of my board.

Everything works fine.

Every link does what it should. But  … when I create a template out of my board  the links are absolute:
They open the old board which I used for creation of the template.

 

How can I make that the links only work inside of the board seperately inside my template without going into my old board …

Best

Michael

Was it helpful?

5 replies

mlanders
Forum|alt.badge.img+9
  • Author
  • Experienced Community Member
  • 743 replies
  • October 3, 2021

… additional:

I need the link underlined like an Internetlink this way:

and not this way:

is this possible for a template creation?

Michael


Kiron Bondale
Forum|alt.badge.img+7
  • Volunteer Community Moderator
  • 3040 replies
  • October 3, 2021

mlanders
Forum|alt.badge.img+9
  • Author
  • Experienced Community Member
  • 743 replies
  • October 3, 2021

@Kiron Bondale :

Thank you - this brings really clearness in my brain BUT it also shows what is necessary for a future update - links shoud always work the same like they are working with this “messy” / “ugly” little blue arrow but they should be visible like we know links from the Internet: underlined - without this arrow!

Michael


Robert Johnson
Forum|alt.badge.img+13
  • Volunteer Community Moderator
  • 7301 replies
  • October 3, 2021

@Kiron Bondale - Thanks for referencing these posts. 

@mlanders - Here is another post that I believe answers your question. In summary, "underlined" links (created using the link icon) remain absolute and are not updated in templates or duplicated boards. 

https://community.miro.com/peer-support-45/when-copying-entire-boards-allows-links-in-the-notes-section-to-correspond-to-the-new-board-5948?postid=24935#post24935


mlanders
Forum|alt.badge.img+9
  • Author
  • Experienced Community Member
  • 743 replies
  • October 3, 2021

@Robert Johnson Thanks Robert …

Hope this will change in some near future …

Michael


Reply